Three (3) Engineering Technicians, Equipment Roles for 3 shifts
Shifts:
First (1st) Shift from Thursday to Monday.
Second (2nd) Shift from Thursday to Monday.
Third (3rd) Shift from Thursday to Monday.
Shift Thursday to Monday or
3rd shift Monday Thru Friday
Candidate must me available for all shifts, Holidays, weekend, OT/DT based on business needs.
Puerto Rico Electrician’s License is preferred
Intention to train candidate and convert it to Regular employee in 1-2 years.
Education / Experience:
Associate Degree in Electrical Engineering, Technology of Industrial Instrumentation, Electronics or Electronic Engineering Technology.
Minimum three (3) years of experience in Electrical / Electronic, PLC, Controls, Instrumentation/ Calibration, basic HVAC and basic Utilities.
Experience on repair and programming of electronic or electro-pneumatic systems, analytical, and high technological manufacturing equipment at the industrial level.
Puerto Rico Electrician’s License is preferred.
Summary:
Provides corrective maintenance, preventive maintenance, calibration, programming, configuration and repair services to manufacturing equipment, packaging equipment, instruments, systems, controls, supporting utilities and/or equipment that perform, measure and control industrial manufacturing processes on different stages of the production, applying mathematical knowledge and concepts of physics, electronics and mechanics; following written policies and procedures and, in addition, complying with regulations applicable to our industry (National Electric Code, NFPA70E, Engineering Standards, cGMP, FDA, OSHA, etc.), operational manuals, specifications and drawings while maintaining a high degree of reliability in a safe and efficient manner. complies with the specifications and laws that they govern the industry.
Skills:
Dismantle/Assemble equipment, remove, and replace instrument, electrical, control and mechanical defective parts. Make changes in production equipment, facilities, utilities or any other equipment used in the production areas that help improve the performance of production processes. Provide troubleshooting, maintenance of controls, instrumentation, electrical and mechanical equipment of high technological level and other aspects necessary to perform the job.
Read, interpret and use drawings, electrical and control circuit diagrams including P&ID and ladder diagrams, equipment, and schematic manuals as reference when performing control, mechanical and electrical works.
Provide support to Control Engineer on troubleshooting PLC and control devices for process and manufacturing equipment.
Demonstrate proficiency in multiple skilled trade disciplines including Predictive Maintenance Technologies and support Reliability Engineering on RCMs and RCAs.
Responsible for repairing, inspecting, modifying, and calibrating the instrumentation equipment and performing preventive and / or corrective maintenance used for the manufacture of pharmaceutical products in accordance with the regulations applicable to our industry (CGMP, OSHA, etc.) maintaining a high degree of reliability in a safe and efficient way. Calibrate and certify instruments used for the processes of operation or manufacture of pharmaceutical products.
Certify the proper functioning of the instrumentation used for the final approval and control of the process of operation or manufacture of pharmaceutical products. Carry out their tasks according to the regularity and frequency determined by the calibration system, following the procedures, and methods approved for such purposes.
Properly document the calibrations performed using the forms and documents approved in the calibration procedures and policies. These include Calibration Work Orders, Out of Tolerance Reports, Repetitive Out-of-Tolerance Reports, etc., following the cGMP policies, procedures, and rules Carry out corrective repairs on electrical and / or pneumatic instrumentation equipment. Perform inspections, problem analysis and take corrective actions to avoid recurrence.
Carry out the maintenance tasks (Preventive, Predictive, Corrective, Calibration) observing and complying with the safety rules and procedures that apply to each activity. Inform, correct, and suggest improvements to observed unsafe situations. Document these tasks as assigned, complying with the applicable procedures, CMMS processes and MEP compliance.
Comply with the Policies, with the plant procedures, and the regulations and requirements of Good Manufacturing Practices (cGMP) of the Federal Food and Drug Administration (FDA). Attend and complete the required internal training on environmental, health, and occupational safety in addition to local training and good manufacturing practices (cGMP). Use the required protective equipment (disposable respirator or PAPR) and notify the supervisor of incidents or unsafe conditions in the work
Provide technical support and perform work during emergency situations in and outside of working hours, on holidays, during weekends or when the supervisor deems necessary.
Years of experience/education and/or certifications required:
Bachelor of Electronics and Controls Preferred, Associate Degree in Controls and Automation
3-4 years of experience, minimum can be considered
UPR Bayamón, Electronic / automatic
Electronic Engineering Associate Degree
Associate Degree in Electrical Engineering, Technology of Industrial Instrumentation, Electronics or Electronic Engineering Technology.
Minimum three (3) years of experience in Electrical / Electronic, PLC, Controls, Instrumentation/ Calibration, basic HVAC and basic Utilities.
Experience on repair and programming of electronic or electro-pneumatic systems, analytical, and high technological manufacturing equipment at the industrial level.
Puerto Rico Electrician’s License is preferred
What are the top 3-5 skills requirements should this person have?
Ability to troubleshoot the Control and Automated System
Licensed Electrician Expert
Instrumentation, controls or PLC
English knowledge - candidate need to understand and read english
Basic knowledge of mathematical calculations
Knowledge of cleaning, adjustment (S / U) and operation of all equipment related to the granulation and coating process.
Pharmaceutical Experience
What is a nice to have (but not required) regarding skills, requirements, experience, education, or certification?
Puerto Rico Electrician’s License is preferred
What type of environment is this person working in?
Group setting
Work Schedule (Define days,# of hours)/ Is Overtime offered or required? If yes, how many hours, what impact to scheduled working hours?
Shift Thursday to Monday or
3rd shift Monday Thru Friday
Candidate must me available for all shifts, Holidays, weekend, OT/DT based on business needs.
Three (3) Engineering Technicians, Equipment
Shifts:
One (1) at First (1st) Shift from Thursday to Monday.
One (1) at Second (2nd) Shift from Thursday to Monday.
One (1) at Third (3rd) Shift from Thursday to Monday.
Does this position offer the ability to work remotely on a regular basis or is it an on-site role? If remote opportunity exists, what are the options (i.e. 1 day remote, 4 days on-site)? Onsite Role
Is the worker onshore or offshore? (If offshore confirm with manager that the worker will align to a USD Cost Center for invoicing purposes.) If no, escalate to Operations Manager N/A
Will there be Domestic and/or International Travel? NO
Job Type: Contract
Experience:
Instrumentation, controls or PLC: 1 year (Preferred)
troubleshoot the Control and Automated System: 1 year (Preferred)
Education:
Associate (Preferred)
Location:
Barceloneta, PR (Preferred)
License:
Electrician Expert (Preferred)
Full Time Opportunity:
Yes
Benefits:
None
Schedule:
Monday to Friday
No weekends
Day shift
8 hour shift
